Knife Anticorrosive

Everyone knows that almost any carbon steel is subject to corrosion to one degree or another. And if you made a knife with your own hands, then sooner or later it will appear rust. Moreover, the knife does not even need to use and it will still rust. I'll tell you how to avoid this and make a simple anticorrosion coating for a knife of your own making.
Anti-corrosion coating of the knife

Tools and Materials

You will need:
  • Vinegar 9% .
  • Alcohol.
  • Cup.
  • Stove.
  • Paper towels.
  • And the knife to cover.
Anti-corrosion coating of the knife

Boil the vinegar

Pour the required amount of vinegar into the pan for boiling. We put on the stove. And while the vinegar comes to a boil, take alcohol and paper towels. Wet the towel with alcohol and wipe the blade of the knife, thereby cleaning it from dirt and degreasing. All work is carried out in a well-ventilated area. Anticorrosion coating of a knife

Making an anticorrosive coating

Anti-corrosion coating of the knife After the vinegar boils, pour it into the cup. Then place the carbon steel blade in this cup. After some time, gas bubbles will appear on the knife blade. The whole procedure can take you from 10 to 20 minutes. At the end of this time, take out the knife and wipe with a paper towel.
Anticorrosion coating of the knife
Anti-corrosion coating of the knife Your anti-corrosion coating is ready. It is not eternal and will fade over time. Must be somewhere for a couple of years. And if it is completely erased, no one bothers you to repeat this procedure again.

Related News

Angelina Jolie swaps black for pink
Trends in Interior Design 2017
The real value of Melania Trump'
Feelings of the dog
What you can wear white jeans, pants and shorts (13 photos)
New decor ideas: a stylish transformation of old things
Pasta Pie