Gas cylinder reactive furnace
Heating devices are used not only in residential, but also in industrial premises. There are a great many modifications to them, because in workshops, conditions are usually not intricate. Therefore, they install everything that is available and economical - from stoves to technically sound heating systems. Today we offer to consider one of the most interesting models of stoves. A rocket or jet furnace is fundamentally different from the others by a high degree of heating and convection of the body, which is made either from bricks (a stone furnace) or from a thick-walled metal. This heater is equipped with a water circuit, connected to radiators and get almost full-fledged economical heating system. Our version of the jet furnace is the author of homemade products that we propose to make from an empty propane cylinder. A small upgrade, a minimum of parts and you have a great option for a heating furnace for a production workshop!Materials:By unscrewing the choke with a wrench, fill the balloon with water to wash off the remaining liquefied gas. Let's leave the water for a while, and then gently tilt the container and merge it. Even after such measures we transfer the balloon neatly to the place of processing. Using a plasma cutter, cut off the bottom of the container. "style =" max- width: 100%; " alt="Reactive furnace from a gas cylinder">
The principle of operation of the furnaceThe furnace consists of a firebox, a heated container and a chimney. The fire pipe is made in the form of a bent pipe, in which the burning of firewood occurs in its lower part. Hot air rises through a vertical pipe located in the center of the heated container, which in our case is made of a gas cylinder. Rising up, the hot air heats the walls of the tank, and gradually cooling down, comes down through the chimney, which creates convection of air and traction in the furnace.
- Propane gas cylinder;
- Square pipe, welded from double angles;
- Metal corner 50x50x5 mm;
- Round pipe for a chimney with swivel knees;
- Auxiliary metal elements: plates, trimmed corners, plugs.
- For metal cutting: plasma inverter cutter or Bulgarian with a stripping and cutting discs;
- Welding machine;
- Metal straight angle, tape measure, marker for marking;
- Bubble level, hammer,brush on metal.
Manufacturing stove-rocketsBefore starting to work, you must remember that gas cylinders are extremely flammable and explosive. They must be thoroughly rinsed with water, temporarily separated in a cylinder, because even small residues of liquefied gas during cutting can lead to an explosion of the container.
Preparing a cylinderA propane household cylinder consists of a neck , shell and bottom. Usually it is placed vertically, so that the stop valves remain in the most prominent place in the center of the balloon. It is necessary to get rid of it, lightly tapping with a hammer.
We cut pipes and scald the fireboxThe next step is to cut the metal corners according to the size of the loading chamber, the firebox and the air duct. Cut them with a grinder or plasma cutter, and boil each of them along the ribs. Connections will be located at different angles. The dimensions of these elements are as follows:
- Vertical air duct - 900 mm;
- Horizontal firebox - 500 mm;
- Feeder or loading chamber - 400 mm.
Install the chimneyAt the bottom of the cylinder, on the opposite side of the furnace, install the chimney. Mark the fitting hole of the nozzle with a marker, cut a circle in the cylinder wall, and scald along the contour.
The best bronzers for a light tanning effect
Hemorrhoids in women: getting rid of an uncomfortable problem
Why health is not only available to the rich
How to pump up the chest girl
Principles of ventilation